TrustSeal Verified

GST 27AAACM2868B1ZO

Tin Compound

Stannous Chloride Dihydrate

Stannous Chloride Dihydrate


SpecificationTypical Actual Finding
DescriptionWhite to off-white crystalline materialWhite Crystalline Solid
Assay as SnCl2.2H2ONot less than 97 % w/w99.01%
SolubilitySoluble in Con. Hydrochloric Acid and EthanolPassed


Physical Properties

Appearance : Crystalline Powder.
Freezing/Melting Point :37.7°C (99.86°F)
Solubility in water :83.9 g/100 ml (0°C)
Molecular Weight :225.63 g/mol
PACKING :25 Kg HDPE Drums
STORAGE : Store in a cool, dry place. Store in a tightly closed container. Protect against physical damage.
UTILISATION :Used for tin plating of steel. Used as reducing agent. Used as antioxidant. Used as a mordant in textile dyeing.

Tin(IV) Chloride Pentahydrate

Tin(IV) Chloride Pentahydrate


SpecificationTypical Actual Finding
AppearanceWhite to yellowish chunks/lumpsWhite to yellowish chunks/lumps
Tin ContentMinimum 33.2%33.4%
AssayMinimum 98%98.64%


Physical Properties

Appearance :White to Yellow Powder or Chunks
Melting Point :56°C
Specific gravity :2.226
Solubility in water :Soluble
Molecular Weight :350.6
PACKING :25 Kg HDPE Drums
STORAGE :Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
UTILISATION :It can be used as an intermediate in the manufacture of pharmaceuticals, electro conductive coatings,paints, pesticides, polymers, resins and wood preservatives.

Additional Information:

Tin (IV) Chloride

Tin (IV) Chloride
  • Tin (IV) Chloride
  • Tin (IV) Chloride
  • Tin (IV) Chloride

SpecificationTypical Actual Finding
Tin Content44.5 % - 45.5 %45.33%
Assay99.0 % Min.99.5%
Appearance & ColorColorless to straw yellow Color liquidStraw yellow color liquid


Physical Properties

Appearance :Liquid
Freezing/Melting Point :-33°C (-27.4°F)
Boiling Point :114°C (237°F)
Density :2.23 g/ml
Solubility :Not available.
Molecular Weight :260.5 g/mole
PACKING :25 Kg HDPE Drums
STORAGE :Store in a cool, dry place. Store in air tight container. Corrosive material. Should be stored in a corrosion proof storage cabinet or room.
UTILISATION :Used as an intermediate in the manufacture of organotin Compounds. Used in glass coatings, ceramic coatings. Used as stabilizer for resins.

Sodium Stannate

Sodium Stannate


SpecificationTypical Actual Finding
AppearancePowderPowder
ColourWhite To Off - WhiteWhite
Tin content %36-42 %41.56%
Free Alkalinity %0-1.8 %1.57 %
Solubility (10% soln.)Clear to slightly hazyClear Solution


Physical Properties:

Appearance : White or colorless crystals.
Freezing/Melting Point :140°C (284°F)
Solubility :61.3g/100ml water @ 20°C (68°F).
Molecular Weight :266.73
PACKING :25 Kg HDPE Drums


STORAGE : Keep in a tightly closed container, store in a cool, dry, ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
UTILISATION :Used as a salt in alkaline tin plating electrolyte Used as a stabilizer to prevent the decomposition of Hydrogen Peroxide. Also used for tin surface treatment.

Stannic Chloride Anhydrous

Stannic Chloride Anhydrous


SpecificationTypical Actual Finding
Tin Content44.5 % - 45.5 %45.33%
Assay99.0 % Min.99.5%
Appearance & ColorColorless to straw yellow Color liquidStraw yellow color liquid


Physical Properties

Appearance : Liquid
Freezing/Melting Point :-33°C (-27.4°F)
Boiling Point :114°C (237°F)
Density :2.23 g/ml
Solubility :Not available.
Molecular Weight :260.5 g/mole
PACKING :25 Kg HDPE Drums
STORAGE : Store in a cool, dry place. Store in air tight container. Corrosive material. Should be stored in a corrosion proof storage cabinet or room.
UTILISATION :Used as an intermediate in the manufacture of organotin Compounds. Used in glass coatings, ceramic coatings. Used as stabilizer for resins.

Stannous Sulfate

Stannous Sulfate


SpecificationTypical Actual Finding
AppearancePowderPowder
ColourWhite To Off - WhiteWhite
Tin Contant %48 – 5251.93 %
Loss on drying2.01.39 %
Insolubles % max in 10% H2SO4 Solution0.50.004 %


Physical Properties

Appearance : White - off-white – fine powder
Freezing/Melting Point :378 °C
Solubility in water :330 g/L (20°C)
Molecular Weight :214.77
PACKING :25 Kg HDPE Drums
STORAGE : Store in a cool, dry place. Store in a tightly closed container. Protect against physical damage.
UTILISATION :Used for dyeing and in acid tin plating baths.

Stannic Chloride Pentahydrate

Stannic Chloride Pentahydrate


SpecificationTypical Actual Finding
AppearanceWhite to yellowish chunks/lumpsWhite to yellowish chunks/lumps
Tin ContentMinimum 33.2%33.4%
AssayMinimum 98%98.64%


Physical Properties

Appearance : White to Yellow Powder or Chunks
Melting Point :56°C
Specific gravity :2.226
Solubility in water :Soluble
Molecular Weight :350.6
PACKING :25 Kg HDPE Drums
STORAGE : Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
UTILISATION :It can be used as an intermediate in the manufacture of pharmaceuticals, electro conductive coatings,paints, pesticides, polymers, resins and wood preservatives.

Additional Information:

Stannous Oxide

Stannous Oxide


SpecificationTypical Actual Finding
Assay As SnO98.0 % Min99.29 %
H2O0.5 % Max.0.3%


Physical Properties

Appearance : Silver-gray to blackish gray
Freezing/Melting Point :1080 °C
Solubility in water :insoluble in water and alcohol
Molecular Weight :134.7
PACKING :25 Kg HDPE Drums
STORAGE : Store in a cool, dry, well-ventilated area away from incompatible substances. Do not expose to air. Store under an inert atmosphere.
UTILISATION :Used as catalyst for the oxidation of aromatic compounds in the synthesis of carboxylic acids. Active esterification catalyst. Used as a reducing agent and chemical intermediate and also used for glass plating. .

Additional Information:

Ethoxy Benzene

Ethoxy Benzene


SpecTypical Actual Finding
AppearanceClear colourless liquid.Clear colourless liquid.
Assay99.0 % MIN.99.3 % (by GC)
Phenol0.05% MAX.0.002%
Water0.2 % MAX.0.08 % (by KF appa.)


Physical and Chemical Properties

Appearance :Clear colourless liquid with a pleasant odour
Melting Point :-30
Boiling Point :171-173
Density :0.9670
Refractive Index :1.5076
Solubility :Insoluble in water , Soluble in alcohol and ether
Flash Point :57
Packing :200 kg. steel or HDPE Drums

Additional Information:
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Tin Compound ?

    country-ico

    We will contact you soon !

    Meenal Bandivdekar

    (Manager)

    Mithila Rasayan Pvt Ltd

    Mulund West, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Get Callback